Tires/Tubes

Durable enough to keep you rolling, yet light enough to not feel overly cumbersome in your jersey pocket. - Presta valve

Among our most versatile drop bar tires, the Venture delivers optimal performance across the widest range of conditions to serve as a truly set-it-and-forget-it gravel tire for riders who demand traction across a wide variety of terrain. Elevated centerline ridges provide consistent working edges that dig in whether hammering up a climb or leaning into a turn. Two rows of outer knobs provide confidence regardless of how hard you’re cornering while also providing substantial sidewall protection. Venture is the tire of choice when the destination is unknown but you’re sure to encounter a variety of terrain along the way. - The large, high-volume footprint of each Venture tire allows for more working edges of the tread to always be in contact with the terrain. - Rounded profile with vertical channels to enhance cornering characteristics. - High-volume casing enables comfortable ride. - Dual Compound Rubber means a fast-rolling tire with great cornering traction.

The Vittoria Agarro trail tire, Enduro inspired performance meets XC efficiency for your Trail bike. The Agarro trail tire is deigned to take you there and back, with a tread profile that gives considerably more grip than an XC tire, but with less bulk than an Enduro tread. - Leading edge steps for fast rolling (like a ramp), but better climbing in technical terrain at slow speeds - E-bike compatible tread profile is then wrapped on Vittoria’s tubeless-ready Trail casing, complete with APF inserts and sidewall protection, for added stability and protection

The new Vittoria Mazza combines years of athlete input with cutting-edge tread technology, raising the bar on the mixed terrain Enduro tire category. Starting with a defined center tread, the Mazza uses deep siping in the direction of rotation, allowing the tire to roll fast while still opposing drift, especially in off-camber terrain. The stepped leading edge rolls like a ramp but digs in on climbs, making Mazza a top choice for both front and rear use. Substantial spacing was designed into the center tread to provide braking traction, while also accelerating mud clearing. Cornering on the Mazza is handled by Vittoria's trademark progressive sipe width technology, which gives a gummy inside effective edge without the instability that competitors experience on the outside of the tread. Simply put, bigger sipes flex more than smaller sipes. This unique siping pattern creates asymmetrical tread flex and translates into a predictable, confident, and communicative feel at the limit of cornering. Mazza's generous tread depth claws into a range of terrain and is stabilized with Vittoria's proprietary 4C compound layering process. Four separate Graphene 2.0 compounds are layered, allowing the surface of the tread to remain tacky while the base remains planted. This ensures each effective edge is kept in place under high cornering and braking loads, leading to reduced rolling resistance and increased wear life. The bar has been raised. - Aggressive profile with ample sipe spacing for mixed terrain - Progressive sipe width for tactile grip on rocks and roots - Stepped leading-edge center-tread maintains speed and delivers climbing traction

The new Vittoria Mazza combines years of athlete input with cutting-edge tread technology, raising the bar on the mixed terrain Enduro tire category. Starting with a defined center tread, the Mazza uses deep siping in the direction of rotation, allowing the tire to roll fast while still opposing drift, especially in off-camber terrain. The stepped leading edge rolls like a ramp but digs in on climbs, making Mazza a top choice for both front and rear use. Substantial spacing was designed into the center tread to provide braking traction, while also accelerating mud clearing. Cornering on the Mazza is handled by Vittoria's trademark progressive sipe width technology, which gives a gummy inside effective edge without the instability that competitors experience on the outside of the tread. Simply put, bigger sipes flex more than smaller sipes. This unique siping pattern creates asymmetrical tread flex and translates into a predictable, confident, and communicative feel at the limit of cornering. Mazza's generous tread depth claws into a range of terrain and is stabilized with Vittoria's proprietary 4C compound layering process. Four separate Graphene 2.0 compounds are layered, allowing the surface of the tread to remain tacky while the base remains planted. This ensures each effective edge is kept in place under high cornering and braking loads, leading to reduced rolling resistance and increased wear life. The bar has been raised. - Aggressive profile with ample sipe spacing for mixed terrain - Progressive sipe width for tactile grip on rocks and roots - Stepped leading-edge center-tread maintains speed and delivers climbing traction

The XCO European Champion tire The Mezcal is the versatile all-rounder that gets you to the podium, time after time. Ride a combination of terrain? This is the choice of the pros. The Mezcal features a unique, low-profile tread that is tightly spaced in the center for low rolling resistance and durability. Countless effective edges work together to grip a variety of terrain, while directional siping on each knob find traction in the roots and rocks. The best tires are built with the best casing and compound, and the Mezcal TNT is no exception. Using the proprietary Graphene enhanced 4C compound, the Mezcal attains the holy grail of XC tires; grip, durability, and low weight. - Defined center-ridge tread for low rolling resistance

You'll ride with peace of mind when you pack a can of Vittoria's Pit Stop Tire Sealant. It contains pure latex foam sealant and compressed air to quickly inflate and repair your tire so you can get on with your ride. Available in three sizes for varying tire volumes: - Road Racing: inflates 21-28-inch tubulars up to 94 psi and 700c clinchers up to 87 psi so you can ride, instead of walk to the closest pump and top off the tire to full pressure. - 75mL: Repairs and inflates low-volume MTB tires in less than a minute. - 100mL: Repairs and inflates meaty 27.5-inch tires and cross country 29-inch tires in less than a minute.

The Terreno Zero features a Corsa-inspired tread design for paved surfaces and hard-packed gravel. The smooth center rolls fast while the side tread "scales" provide durable bite when cornering and braking. - Designed for paved surfaces and hard-packed gravel - Graphene compound

OS20 diameter BMX race tires designed to balance traction and low rolling resistance with a block-designed center tread. - CYLEX 120 TPI superlight casing - UTC rubber compound - Patterned sidewall adds abrasion protection while maintaining casing suppleness - OS20 utilizes a larger diameter tire design to increase rolling efficiency Compatibility: - Must use with specific OS20 frames and rims, however many forks will accept this tire sizing currently - ISO Diameter = 451mm - NOT compatible with standard 20-inch BMX rims (ISO Diameter = 406mm)

- Labeled Size: 26 x 4.0 – 4.8 - ISO Width: 100mm – 120mm - ISO Diameter: 559 / 26" MTN - Wall Thickness: 1mm - Valve length: 32mm - Shaft Type: Threaded - Valve Core: Removable - Weight: 580g

- Labeled Size: 26 x 3.5 – 4 - ISO Width: 88mm – 100mm - ISO Diameter: 559 / 26" MTN - Valve: Presta Short 32-40mm - Valve Core: Removable - Wall Thickness: 1mm - Weight: 500g

- Labeled Size: 26 x 3.5 – 4 - ISO Width: 88mm – 100mm - ISO Diameter: 559 / 26" MTN - Shaft Type: Threaded - Valve: Standard Schrader - Valve Core: Removable - Wall Thickess: 1 - Tube Compound: Butyl - Weight: 500

- Labeled Size: 26 x 4.0 – 4.8 - ISO Width: 100mm – 120mm - ISO Diameter: 559 / 26" MTN - Valve: Standard Schrader - Wall Thickness: 1mm - Valve length: 32mm - Weight: 580g

The Sparwood has bikepacking deeply ingrained in its DNA, and is ready for any surface. The casing supports a perfect balance of low rolling resistance and reduced weight for excellent maneuverability and stability. Whether navigating routes comprised of jeep roads, twisty singletrack, gravel tracks, or paved connecting sections, the Sparwood is ready for the ride. - Tubeless ready for flat prevention, lower-pressure traction, and comfort

- Low Lead Valve - ISO Diameter: 305 / 16" BMX - Tube Compound: Butyl - Valve: Standard Schrader - Valve Core: Removable - Valve Shaft: Smooth - Weight: 76g (1.25-1.5), 92g (1.5-1.75), 102g (1.75-2.125)

- ISO Diameter: 406 / 20" BMX - Wall Thickness: 0.9mm - Tube Compound: Butyl - Valve: Standard Schrader - Shaft Type: Smooth - Valve Core: Removable

- ISO Diameter: 507 / 24" BMX - Tube Compound: Butyl - Wall Thickness: 0.9mm - Valve: Standard Schrader - Shaft Type: Smooth - Valve Core: Removable

- Size: 26 x 1.0 – 1.25 - ISO Diameter: 559 / 26" mtn - ISO Width: 25mm, 26mm, 27mm, 28mm, 29mm, 30mm, 31mm - Tube Compound: Butyl - Valve: Presta - Valve Core: Removable - Valve Shaft: Threaded - Weight: 96g

- Size: 26 x 1.9 – 2.125 - ISO Diameter: 559 / 26" mtn - ISO Width: 48mm, 49mm, 50mm, 51mm, 52mm, 53mm, 54mm - Tube Compound: Butyl - Valve: Presta - Valve Core: Removable - Valve Shaft: Threaded - Weight: 170g (32mm), 171g (48mm)

- ISO Diameter: 559 / 26" MTN - ISO Width: 48mm, 49mm, 50mm, 51mm, 52mm, 53mm, 54mm - Labeled Size: 26 x 1.9-2.125 - Tube Compound: Butyl - Valve: Long Schrader - Valve Core: Removable - Valve Shaft: Smooth

- Size: 26 x 2.1 – 2.3 - ISO Diameter: 559 / 26" mtn - ISO Width: 53mm, 54mm, 55mm, 56mm, 57mm, 58mm - Tube Compound: Butyl - Valve: Presta - Valve Core: Removable - Valve Shaft: Threaded - Weight: 202g

- ISO Diameter: 559 / 26" mtn - Tube Compound: Butyl - Valve: Standard Schrader - Valve Core: Removable - Valve Shaft: Smooth - Weight: 102g (1-1.25), 165g (1.5-1.75), 174g (1.9-2.125), 198g (2.1-2.3), 281g (2.4-2.75)

- ISO Diameter: 584 / 650b / 27.5" - Tube Compound: Butyl - Valve: Presta - Valve Core: Removable - Valve Shaft: Threaded

- ISO Diameter: 584 / 650b / 27.5" - ISO Width: 52mm, 53mm, 54mm, 55mm, 56mm, 57mm, 58mm - Labeled Size: 27.5 - Tube Compound: Butyl - Valve: Presta - Valve Core: Removable - Valve Length: Schrader - Valve Shaft: Schrader

- ISO Diameter: 622 / Road / 29" - Tube Compound: Butyl - Wall Thickness: 0.9mm - Valve: Presta - Shaft Type: Threaded - Valve Core: Removable

- ISO Diameter: 622 / road / 29" - ISO Width: 48mm, 49mm, 50mm, 51mm, 52mm, 53mm, 54mm - Size: 29 x 1.9-2.3 - Tube Compound: Butyl - Valve: Long Schrader - Valve Core: Removable - Valve Shaft: Smooth

- Size: 700c x 23 – 25 - ISO Diameter: 622 / road / 29" - ISO Width: 23mm, 24mm, 25mm - Tube Compound: Butyl - Valve: Presta - Valve Core: Removable - Valve Shaft: Threaded - Weight: 125g (32mm), 126g (48 & 60mm), 128g (80mm)

- Size: 700c x 28 – 32 - ISO Diameter: 622 / road / 29" - ISO Width: 28mm, 29mm, 30mm, 31mm, 32mm - Tube Compound: Butyl - Valve: Presta - Valve Core: Removable - Valve Shaft: Threaded - Weight: 128g (32mm), 129g (48 & 60mm)

- Size: 700c x 35 – 43 - ISO Diameter: 622 / road / 29" - ISO Width: 35mm, 36mm, 37mm, 38mm, 39mm, 40mm, 41mm, 42mm, 43mm - Tube Compound: Butyl - Valve: Presta - Valve Core: Removable - Valve Shaft: Threaded - Weight: 140g

- ISO Diameter: 622 / road / 29" - Tube Compound: Butyl - Valve: Long Schrader - Valve Core: Removable - Valve Length: Schrader - Valve Shaft: Smooth