Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Other

Wolf Tooth ReMote Light Action Dropper Lever
$69.95
Wolf Tooth ReMote Light Action has a longer lever arm than the standard ReMote and is optimal for dropper posts with a harder pull or for riders that just prefer a really light actuation feel. It reduces the force to actuate a dropper by nearly a third of the standard ReMote. Based on rider feedback and tailored to work with some posts’ stiffer internal springs, the ReMote Light Action is also the choice of those with thumb injuries or reduced hand strength. - Upfront cable fixing - Large diameter ball bearing - Cable-kind clamp - Low-profile, light action - Integrated cable adjust - Breakaway axle pivot - High-traction lever - Broad compatibility
Wheels Manufacturing Ball Bearing Retainer
$10.45 - $20.48
Grade 300 retainer bearings for headset and bottom bracket service. - 10 Retainers/Bag
Wheels Manufacturing Derailleur Hanger 295
$70.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Fastener is not included - Replaces Cannondale Part # E123007-1 R3 (KP381) - For MAXLE Axles Not the same as DROPOUT-293. Check for correct thru axle fit.
Wheels Manufacturing Grade 25 Loose Ball Bearings
$12.75 - $18.38
Loose ball bearings to fit many brands of hubs, headsets, and bottom brackets. Grade 25 bearings are Dura-Ace or Campagnolo Record quality.
TruVativ M12 Self-Extracting Crank Arm Bolt Cromoly for Howitzer
$16.80
- Truvativ, Crank arm bolt, M12, Cromoly, Self-extracting for Howitzer, Bag of 2
Sunlite Cassette Spacer
$2.99
- Alloy spacer converts an 8-speed rear hub to use a 7 speed cassette - Range: 4mm - Color: Silver
Sunlite Chromoly Quill Stem Extender
$20.95
When you need to move your handlebars up, install Sunlite's Chromoly Quill Stem Extender. One end goes inside the steerer tube and your quill stem inserts into the top. It provides 8 1/4 inches of rise and is compatible only with quill stems and steerer tubes.
Shimano XT M8000 I-Spec II Integration Bolt Unit
$11.00
This replacement bolt unit ensures your I-Spec II shifters, dropper levers, and/or brake levers are securely fastened. Make sure your controls are ready to rip.
SRAM Braze-on Front Derailleur Clamp with ChainSpotter Stop
$35.00
Clamp allows use of a braze-on derailleur on frames without the braze-on tab. Includes a tab to use SRAM's lightweight and easy-to-adjust chain control device. - Fits all SRAM road braze-on front derailleurs - ChainSpotter not included
SRAM Stealthamajig Hydraulic Disc Brake Hose Fitting Kit
$7.99
Hose fittings fit many of SRAM's newest hydraulic brake models. - Includes 5 Threaded Hose Barbs, 5 Compression Fittings, 1 T8 Torx Wrench - Fittings are backwards compatible with older SRAM and Avid hydraulic brakes
SRAM Universal Derailleur Hanger
$16.00
The Universal Derailleur Hanger consolidates thousands of hanger options across the industry. It protects your derailleur against chain jams by pivoting back and out of the way, and slips slightly when encountering impacts. It improves shifting performance, guarantees better alignment, and works with all drivetrains. Plus, if you ever need replacement, it will be available everywhere. The UDH: one hard-working hanger. - The Universal Derailleur Hanger—or UDH—consolidates thousands of mountain bike derailleur standards. - It offers unparalleled derailleur protection and perfect alignment, guaranteed. - The UDH is designed to rotate rearward in the event of impact and features the ability to "re-rail" the chain back onto the small cog. - The UDH works with all commercially available MTB and E-MTB drivetrains from Shimano to Box to Sunrace.
RockShox Reverb AXS 200 Hour Service Kit V2
$23.00
SEATPOST SERVICE KIT - 200 HOUR/1 YEAR SERVICE (INCLUDES FOAM RING, INNER SEALHEAD BUSHING, & O-RINGS) - REVERB AXS
RaceFace Turbine R 1x Dropper Remote (2021)
$69.00
Down Under Mounted under your bar, the redesigned Turbine R 1x Seatpost Lever may just become your thumb's new best friend. This strong, lightweight lever is a real smooth operator that is a breeze to actuate. Optimized for use with our Turbine R dropper but will play nice with other posts. Strong For Any Size This lever is made from forged and machined 6061-T6 Alloy for lightweight durability. Comes with all clamp options, including Matchmaker and I-Spec EV. Thumbs up To show your thumb a good time, this lever features a textured non-slip pad and moves on an oversized sealed bearing pivot for pure silky performance. Rainbow Drop Available in black and 5 other vibrant colors, the Turbine R 1x lever will work with other cable-operated posts needing 10mm or less of cable pull. - Compatible with Matchmaker - Includes cable and housing - Mechanical lever actuation - Weight: 33g
Problem Solvers Center Lock Rotor Adapter
$24.99 - $30.25
The Problem Solvers Center Lock Rotor Adapters are CNC-machined aluminum adapters that allow the use of 6-bolt rotors on Shimano's Center Lock hubs.
Problem Solvers Center Lock to 6-Bolt Rotor Adapter Kit - 12 – 20mm Axle
$24.99
The Problem Solvers Center Lock Adapter Kit allows riders to use 6-bolt rotors on Shimano Center Lock compatible hubs. - Not intended to be used with rotors over 180mm in diameter - Made of extruded, CNC-machined, and broached AL-6061-T6 - Designed for use with Center Lock hubs and 6-bolt disc brake rotors
OneUp Components EDC Top Cap
$27.50
The EDC Cap Kit includes the worlds lightest headset top cap (4.2g), and an EDC steerer plug with drain hole which keeps crud out of your steerer. Top caps are compatible with all 1-1/8" aluminum steerer tubes. The EDC steerer plug is required for EDC tool storage and is compatible with most aluminum tapered steerer tubes. KIT INCLUDES - EDC TOP CAP - EDC steerer plug - 2x 1mm, 3mm, & 5mm Headset Spacers
OneUp Components Switch - Cinch
$30.72
SWITCH. A QUICK-CHANGE DIRECT MOUNT CHAINRING SYSTEM FROM ONEUP COMPONENTS. Switch was developed to reduce the cost of replacement chainrings, increase compatibility with new offsets and to make the process of changing your chainring much faster and simpler. - Cheaper Replacement Cost - Replacement rings are a fraction of the cost of a complete direct mount chainring - Quick Change - Replace your ring in less than an minute, using only a 4mm hex key. Tailor your gearing to the terrain that you're riding - Enduro World Series Champion Winning Narrow Wide tooth profile keeps your chain in place on the roughest terrain - 4 Ring Sizes (28, 30, 32, 34T) - 2 Profiles - both Round and Oval - 12 speed ring designed to work with both Shimano Hypergilde+ 12 speed chains and SRAM Eagle 12 speed chains. - Get ultimate traction with Oval rings by smoothing out the torque you deliver to your rear tire - 3 Offsets - Regular, Boost and Super Boost - Quick Change Rings can be replaced in less than a minute with only a 4mm allen key, without removing your crank. Simply loosen the bolts 2 turns, unlock the ring by rotating it by 20 degrees and pull it over and off your crank. Reverse these steps to install your new ring. If you plan to ride a trail that you know is steeper than your local trails, you can switch to a smaller ring in the parking lot, in less time than it takes your friend to put on his riding shoes! SPECS - Material: 7075-T6 - Weight: 69g (30T Boost Cinch Oval) - Chainline: Regular (49mm), Boost (52mm), Super Boost (56.5mm) - Compatibility: Race Face Cinch cranks; 9, 10, 11 and 12 Speed Chains
KMC MissingLink 12-Speed
$6.00 - $10.00
- Missing links to make chain installation, maintenance and reparation easier - Card of 2
KMC MissingLink 9-Speed
$2.25
- Missing links to make chain installation, maintenance and reparation easier - Card of 2
Jagwire Brake or Shift Cable Tips
$4.49 - $44.99
Jagwire's Brake or Shift Cable Tips are made of lightweight, corrosion-resistant and durable aluminum and are the right size to nicely fit over the ends of up to 1.8mm-diameter cables. These caps are crimped in place on the cables to prevent fraying and ensure your cables last a long time. The tips come in colors to add a little style to your bike.
Greenfield Stabilizer Rear Mount Kickstand
$24.99
Greenfield's Stabilizer Rear-Mount Kickstand attaches to the rear chainstay of the bicycle so it's perfect for bikes that won't accept regular kickstands like mountain bikes. It comes complete with an extra wide rubber foot for superior stability and won't interfere with pedal action or rear derailleur cables. This is the stand of choice for law enforcement bike patrols throughout the U.S. - Fits tube sizes up to 7/8" in diameter - Certified Non-Corrosive Casting - Snap Action Mechanism - 285mm (for bikes 22" and under), 305mm (for bikes 22" and over)
Enduro Max Cartridge Bearing 6802
$8.00
- MAX bearings are filled completely with high precision Grade 10 balls for maximum load capacity - No retainer means these bearings have 40 percent more capacity
Dimension Steerer Extender
$42.00 - $44.99
Dimension Steerer Extender adds 2 to 3-1/4" height to steerer. - Extender clamps to steerer; stem clamps to extender - Adds 2 to 3-1/4-inch height to threadless steerer - Includes top cap and long bolt - 40mm of threadless steerer is required for proper installation - Do not stack steerer extenders; no more than one steerer extender recommended per bike - WARNING: Dimension Steerer Extender is not recommended for use on forks with carbon fiber steerers
45NRTH Cobrafist Bar Donuts
$12.00
- Replacement bar donuts for cobrafist pogies
45NRTH Cobrafist Bar Plugs
$20.00
Replacement bar end plug for 45NRTH Cobrafist pogies
absoluteBLACK HOLLOWcage Oversized Derailleur Pulley Cage for Shimano 9100 / 8000
$699.00
The absoluteBLACK's HOLLOWcage® Oversized Derailleur Pulley Cage for Shimano 9100 / 8000 features a revolutionary mono-plate design to provide quiet and precise shifting. - Designed for use with Shimano Dura Ace 9100 / 9150 / 9170 , and Ultegra 8000 / 8050 - Fits up to a 32T cassette - The Silent Xring Pulley dampens the chain impact on the guide pulley teeth, eliminating the engagement noise -Flexible cage design aligns better with the angle of the chain when using the higher gears of the cassette - HOLLOWcage uses abnormally large, bespoke, full ceramic bearings that make the pulleys incredibly stiff for greater shifting precision - Upper pulley features tall teeth to provide improved shifting precision
absoluteBLACK Integrated Headset Top Cap and Bolt
$19.99
The absoluteBLACK integrated headset top cap is a one-piece top cap and bolt with a 5mm hex socket. It is designed to fit every standard starnut. - One-piece design is lightweight (only 4g) - Not suitable for "expanding" star nuts with a steel coil spring - Compatible with the ENVE compression plug
absoluteBLACK Road Chain Catcher
$21.99
absoluteBLACK's Chain Catcher is designed to eliminate the possibility of the chain falling in towards the frame when shifting to the inner chainring on uneven road. Chain Catcher is a simple add-on component which improves the overall function of your drive train and protects your valuable frame from dropped chains. Especially recommended for carbon frames. No matter how well you set up the front derailleur with round or oval rings, there is always a possibility that chain may find its way to drop on the frame when you shift quickly from outer ring to inner one. Especially on rough or gravel roads. Mounting the Chain Catcher in front of the front derailleur will prevent such occurrence from happening because the chain will be guided precisely onto the small ring and will not be able to go any further towards the frame. Our Chain Catcher has a conical tapered head, providing an excellent fit to braze-on mounts that are integrated with frame. However, with older frames you may use a clamp braze-on adapter. In such case please ensure that your adapter has a front face also conical (not flat). Unlike the majority of chain catchers on the market, absoluteBLACK's Chain Catcher can be precisely adjusted to ensure only minimal gap is left to the inner chainring for maximum security. - Mass/Size: 11.6g / one size fits all - Compatibility: All braze-on frames and derailleurs. - Adjustability: 6mm chainline adjustment provided on the slot for precise setup - Material: CNC machined 7075 T6 / M5 stainless steel bolt - Finish: type II anodizing
Zipp Bearing Kit: For 2005-2008 82/182 Hubs
$46.00
Zipp Speed Weaponry Cartridge Bearings
Zipp Bearing Kit: For Rear 188 V9 Hubs
$44.00
Zipp Speed Weaponry Cartridge Bearings
Page 1 of 37 Next page