Headsets

FSA Standard Headset Bearings

- Machined aluminum spacers for tuning stem height - Black spacers with white FSA graphic - 5mm and 10mm Spacers are sold individually - 1-1/8" Spacer Kit includes: (3) 3mm, (4) 5mm, (3) 10mm, (2) 20mm

Crown races for Cane Creek headsets fit a variety of lowers and crown race seat diameters. - Compatible with 10-, 40- and 110-Series headsets and backwards compatible with S and XX Series - Integral mold seals keep out the elements - Durable steel construction

Grade 300 retainer bearings for headset and bottom bracket service - 5/32" ball diameter - 16 balls per retainer - Grade 300 Bearings - 10 Retainers/Bag

Grade 300 retainer bearings for headset and bottom bracket service - 5/32" ball diameter - 20 balls per retainer - Grade 300 Bearings - 10 Retainers/Bag

Loose ball headset bearing retainers. - Grade 300 bearings

Crown races for Wolf Tooth headsets. - For Wolf Tooth headsets

- Fork crown race for genuine Ritchey headsets - Alloy with 45-degree taper

FSA Standard Headset Bearings

Headset bearings for Wolf Tooth headsets. - Replacement bearings

Custom Cane Creek lower race for Salsa.

FSA bearings that set directly into the frame without the use of pressed in cups. - 36/45 degrees is Cane Creek-compatible - 45/45 degrees is Campagnolo-compatible

- Forged steel cups with caged 5/32" ball bearings - TH-857 features a alloy top cover - TH Series: External Cup, traditional - S.H.I.S.: EC34/28.6|EC34/30 - Stack: 14.9mm/11mm - Color: Black - Weight: 126g

- Threadless Black 1-1/8" Headset - Retainer Bearings Specs: - Headset Type: External, Threadless - Weight: 140g - Material: Steel - Crown Race Diameter: 30mm - Lower Cup: 1-1/8" - Upper Cup: 1-1/8" - Steerer Tube: 1-1/8'' - Bearing Grade: Caged ball

FSA Standard Headset Bearings

Compatible crown races for Ritchey headsets. - This adaptor allows 36° headset bearings, such as those from Chris King, to fit the Ritchey WCS Carbon Adventure fork that feature a 45° crown race - This adaptor is designed for the Ritchey Carbon Adventure fork, but it will work with all Ritchey carbon fiber forks, though with possible slight cosmetic inconsistencies - Stainless steel - Use of this adapter will effectively increase fork length by 4.4mm

Headset bearings for Wolf Tooth headsets. - Replacement bearings

Grade 300 retainer bearings for headset and bottom bracket service - 5/32" ball diameter - 22 balls per retainer - Grade 300 Bearings - 10 Retainers/Bag

Replacement headset uppers from FSA. - S.H.I.S. Stem Clamp Diameter: 28.6 Threadless - Bearing Type: Cartridge - S.H.I.S Upper: IS41 - Upper Stack Height: 8.2

- No. series headsets offer excellent performance and value - No. 8b: 36x45 degree Cane Creek Integrated, or No. 10: Zero Stack shallow available for 1-1/8" applications - No. 10 S.H.I.S.: ZS44/28.6|ZS44/30 - No. 8B S.H.I.S.: IS42/28.6|IS42/30 - Stack: 5.2mm/3.7mm (No. 10), 8mm/1mm (No. 8B) - Color: Black - Weight: 93g (No. 10), 74g (No. 8B)

The Ritchey Logic Threadless headset features a smaller upper bearing to save weight, while the oversize lower bearing is designed to handle loads. Deep bearing cups promise solid insertion. - Bearing: Retainer ball bearing - Material: Steel/Plastic - Stack Height: 28.3mm

Headset Spacer Kit

The Chromag Top Cap completes your kit, CNC'd from 6061 aluminum to match your Chromag stem. Comes with a 6061 anodised colour-matched bolt.

- CrMo headset with oversized 3/16" lower ball bearings, 5/32" upper bearings and a nylon top cover - Hammer: External Cup, traditional - S.H.I.S.: EC34/28.6|EC34/30 - Stack: 12.8mm/11.9mm - Color: Black - Weight: 149g

- Forged steel cups, alloy tops and cap with sealed bearings
- Available for 1" (25.4mm) or 1-1/8" (28.6mm) EC (traditional cup) applications

- CNC machined alloy tops with sealed mechanism 45/45 degree bearings
- Available as 1" (25.4mm), 1-1/8"(28.6mm) and 1-1/8" to 1" reducer

Replacement headset bearings from FSA. - Compatible with most Trek MTB integrated headset systems - Sealed bearing for long life - Compatible with Knock Block Headsets

- CrMo headset with oversized 3/16" lower ball bearings, 5/32" upper bearings and an alloy top cover - Mallet: External Cup, traditional - S.H.I.S.: EC34/28.6|EC34/30 - Stack: 15.4mm/13.6mm - Color: Black - Weight: 150g

- Carbon fiber top caps, bolt and steel star nut - Size: 1-1/8" - Color: Black - Weight: 21g

The Ritchey Comp Cartridge Drop In Integrated headset lower features full-complement, stainless steel, angular contact, sealed cartridge bearings packed with Ritchey high-webbing grease. - Material: Alloy - Bearing: Sealed cartridge - Weight: 39g

FSA Standard Headset Bearings

FSA bearings that set directly into the frame without the use of pressed in cups. - 36/45 degrees is Cane Creek-compatible - 45/45 degrees is Campagnolo-compatible

A new headset gives you a new lease on life. This is the upper part of an integrated headset for a 44mm headtube. - Lower part of the headset sold separately

ABI Headset Bearing for new builds or replacements.

For bikes featuring integrated headsets (such as the Ritchey Road Logic and Swiss Cross), the Classic Drop-In Integrated Headset stands above all others. This alloy beauty features full-complement stainless steel angular contact cartridge bearings packed with Ritchey high-webbing grease. Wrapped in our timeless high-polish finish, the Classic Drop-In Upper headset adds that classy detail your bike deserves. - Stack height: 12.5mm - Material: Alloy - Upper Fit (S.H.I.S.): ZS44/28.6 - Upper HT OD/ID: 50/44 - Bearing: Ceramic Hybrid Cartridge (ACB)—Ti Coated - Weight: 79g

For bikes featuring integrated headsets (such as the Ritchey Road Logic and Swiss Cross), the Comp Drop In Integrated Headset stands above all others. The Comp features full-complement stainless steel angular contact cartridge bearings packed with Ritchey high-webbing grease. - Top cap: 8.3 or 15.3mm - Material: Alloy - Upper Fit (S.H.I.S.): IS42/28.6 - Lower Fit (S.H.I.S.): IS42/30 - Upper Bearing OD: 41.8 - Lower Bearing OD: 46/42 - Top Cover OD: 46 - Bearings: Sealed cartridge - Weight: 74g

- Pig DH-Pro feature angular contact sealed upper bearing and an industrial cartridge sealed bearing with an alloy upper cup and CrMo lower cup - Pig feature oversized 1/4" lower ball bearings, 5/32" upper bearings - Big Fat Pig feature super oversized caged ball bearings - Pig: External Cup, traditional - Pig S.H.I.S.: EC34/28.6|EC34/30 - Big Fat Pig S.H.I.S.: EC49/38.1|EC49/40 - Pig DH Pro S.H.I.S.: EC34/28.6|EC34/30 - Stack: 15.4mm/13.6mm (Pig), 17mm/11.7mm (Big Fat Pig), 15.5mm/16mm (Pig DH Pro) - Color: Black - Weight: 193g (Pig), 345g (Big Fat Pig), 198g (Pgi DH Pro)

For bikes with press-fit head tubes, the Ritchey Comp Press Fit headset stands out above all others. The Comp features full-complement stainless steel angular contact cartridge bearings packed with Ritchey high-webbing grease. The upper bearing is a sealed cartridge, while the lower bearing is coated in titanium. - Upper Fit (S.H.I.S.): ZS44/28.6 - Upper HT OD/ID: 50/44 - Lower Fit (S.H.I.S.): ZS44/30, ZS55/40, ZS55/40 - Lower HT OD/ID: 50/44, 61/55, 61/55 - Material: CroMo - Top cap: 7.3 or 12.4mm - Upper Bearing: Sealed cartridge - Lower Bearing: Ti coated, sealed cartridge - Weight: 83g (7.3mm), 103g (12.4mm)

ABI Headset Bearing for new builds or replacements.

ABI Headset Bearing for new builds or replacements. - Enduro Headset Bearing ACB 4545 136 Stainless 32.75 x 41.75 x 6 mm: 45 x 45

For bikes featuring integrated headsets (such as the Ritchey Road Logic and Swiss Cross), the Comp Drop In Integrated Headset stands above all others. The Comp features semi-cartridge high-quality bearings. - Material: Steel - Top Cover OD: 46mm - Bearings: Semi-cartridge - Weight: 74-83g

A key component of the new Ritchey Switch System, Ritchey's newest headset upper is designed to specifically work with the Ritchey Switch Stem to route cables, wires and hydraulic lines from the handlebar through to the bicycle frame. Cables are routed from the handlebar into the headset conduit, which sits on the underside of the Switch Stem and then travel through an opening on the front of the Switch headset spacers before passing through two channels on the top of the headset and into the frame. This system allows headset bearings to perform without any interference from cables, wires, or lines passing through the headtube.

- Integrated lower headset for 1.5" or tapered steerers - 36° x 45°

- Weight: 160g - Crown Race: 30 - S.H.I.S. Lower: EC34 - S.H.I.S. Upper: EC34 - S.H.I.S. Stem Clamp Diameter: 28.6 Threadless

Designed to allow cables and wires to easily integrate with internal frame routing when using any standard stem.

For bikes featuring integrated headsets (such as the Ritchey Road Logic and Swiss Cross), the WCS Drop In Integrated Headset stands above all others. This alloy headset lower features stainless steel angular contact sealed cartridge bearings with a titanium coating for corrosion resistance, and they're packed with Ritchey high-webbing grease. - Material: Alloy - Bearing: Sealed cartridge, Ti-coated - Weight: 28-35g

Wolf Tooth headsets are machined in the USA with aircraft-grade 6061 aluminum. Our Performance Headset is built to include a black oxide-coated chromium steel bearing and a one-year warranty. Our headsets stand above the rest with three levels of superior custom sealing to protect bearings from the elements and prolong the life of the headset. They are designed to be lightweight, strong, and durable. Available in a variety of colors. These EC headsets are for frames with external bearing cups, which places the bearing outside of the frame with these headsets. Lower assembly features: - Custom molded dual-lip seal on the crown race to protect the lower bearing in the toughest conditions. - 12.25mm stack. - Service and additional parts available.

Wolf Tooth Performance Headsets feature Black Oxide Cartridge Bearings, balancing quality and price. - Black Oxide Bearings are made from chromium steel for high load capacity and durability - Black oxide coating reduces corrosion

Headset bearings for Wolf Tooth headsets. - Replacement bearings

Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 40-Series headsets. • Technical Description: IS52/30/H1 • Bottom Type: IS - Integrated • Bottom Head Tube Inside Dia.: 52.1mm • Crown Race Seat Dia.: 30.015mm • Crown Race Type: Steel, Face-Sealed • Bottom Stack Height: 1mm • Bottom Bearing Type: Black Oxide, Sealed • Material: N/A • Weight: 72g

This is the Integrated Bottom Bearing for the Cane Creek 40 Series headset. Please contact us if you have any questions about which parts are correct for your headset.

Designed using high-quality sealed bearings and a precision tapered wedge to keep the headset tight at all times. FEATURES - High-quality sealed bearings. - Color matched spacers included. - 10mm, 3mm and 2mm (15mm total) - Laser etched Odyssey bearings. SPECS - Campagnolo standard spec. - 1-1/8 integrated headset. - 45º tapered bearings 41.8mm outer diameter (fits 42mm BMX head tubes).

New dust cap design, with Monogram laser etched logo, for a cleaner look to accommodate a taller riding set up with less spacers. Same quality as Odyssey's Pro Headset using high-quality sealed bearings and a precision tapered wedge to keep the headset tight at all times. FEATURES - High-quality sealed bearings. - Color matched spacers included. - 15mm dust cap. With 3mm, and 2mm spacers - Laser etched Odyssey bearings. SPECS - Campagnolo standard spec. - 1 1/8-inch integrated headset. - 45º tapered bearings - 41.8mm outer diameter (fits 42mm BMX head tubes).

A key component of the new Ritchey Switch System, Ritchey's newest headset upper is designed to specifically work with the Ritchey Switch Stem to route cables, wires and hydraulic lines from the handlebar through to the bicycle frame. Cables are routed from the handlebar into the headset conduit, which sits on the underside of the Switch Stem and then travel through an opening on the front of the Switch headset spacers before passing through two channels on the top of the headset and into the frame. This system allows headset bearings to perform without any interference from cables, wires, or lines passing through the headtube.

A key component of the new Ritchey Switch System, Ritchey's newest headset upper is designed to specifically work with the Ritchey Switch Stem to route cables, wires and hydraulic lines from the handlebar through to the bicycle frame. Cables are routed from the handlebar into the headset conduit, which sits on the underside of the Switch Stem and then travel through an opening on the front of the Switch headset spacers before passing through two channels on the top of the headset and into the frame. This system allows headset bearings to perform without any interference from cables, wires, or lines passing through the headtube.

Cane Creek's 10 Series has light, tough, and beautiful machined 6061 T6-aluminum cups, Cane Creek's corrosion-resistant black-oxide angular-contact bearings and quality seals throughout to keep the grease in and the dirt out. • Technical Description: EC49/40/H12/K • Bottom Type: EC - External Cup • Bottom Head Tube Inside Dia.: 49.61mm • Crown Race Seat Dia.: 39.79mm • Crown Race Type: Polymer • Bottom Stack Height: 12mm • Bottom Bearing Type: Black Oxide • Material: 6061 aluminum • Weight: 76.57g

ABI Headset Bearing for new builds or replacements.

ABI Headset Bearing for new builds or replacements. - Enduro Headset Bearing ACB 4545 137 Stainless 37 x 46.85 x 7 mm: 45 x 45

High-quality replacement headset bearings are smooth like butter. - Sealed cartridge bearing for long life - Durable steel bearing housing

The Ritchey Logic Threadless headset features a smaller upper bearing to save weight, while the lightweight, precision-machined aluminum cups are deep for solid insertion. - Bearing: Semi cartridge - Material: Steel - Stack Height: 30.2mm