Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Parts & Accessories

Syncros FL Computer Mount
$24.99
The Syncros Computer hanger provides perfect integration for your Garmin on the Syncros FL Stem with a higher position than our XR version.
Syncros XR Computer Mount
$24.99
The Syncros Computer hanger provides perfect integration for your Garmin on the Syncros XR Stem. Simply replace the stem cap.
SRAM eTAP Battery Charger
$45.00
SRAM eTap batteries are literally a snap to remove and charge. Just flip the tool-free battery latch up and slide the battery up and out of the derailleur. Then snap the battery into the USB powered charger and connect the charger to any USB power source or A/C USB adaptor. A full charge takes just 45 minutes to complete. - Finish: Black - Compatibility: SRAM RED eTap
SRAM eTap Battery
$55.00
SRAM eTap Battery is the power source for the eTap system. The same power unit is interchangeable between front and rear derailleurs. - Up to 1000 kilometers of riding per charge - Weight: 24g - Finish: Black - Compatibility: SRAM RED eTap
Garmin Charging/Data Cable
$24.99
Complete 2 tasks with 1 cable using Garmin's charging/data cable. Connect the cable to your computer's USB port to recharge your compatible device and to transfer data to and from your computer. This cable also pairs with an optional AC adapter (sold separately). Compatible devices: - Approach S60, D2 Charlie, fenix 5/5S/5X, Forerunner 935, quatix 5, quatix 5 Sapphire, vivoactive 3, vivosport
Zipp QuickView Road Low Computer Mount
$22.00
Low Road position places the computer in front of the bar and nearly flush with the top of the bar, making for an easy to read display whether you are on the hoods or in the drops. - Sub-20 gram computer mount - Compatible with computers with 1/4 turn twist lock interface and 31.8mm bar surface - Single Torx T25 fixing bolt
Zipp QuickView TT Computer Mount
$22.00
Zipp delivers an uncomplicated computer mount for aerobar extensions that’s easy to install, lightweight, and vibration and slip free. The 22.3mm industry standard mount installs simply and securely on aero extensions. The Zipp QuickView TT Computer Mount is aerodynamically shaped for left-side installation, but also can be installed on the right bar extension. It comes with a single Torx T25 bolt, flexible mounting clamp, and a quarter-twist mount.
Zipp Vuka Shift AXS Computer Mount
$31.00
Handlebar computer mount for Garmin/Wahoo for Vuka Shift AXS
XLAB Space Saver Computer Mount
$16.95
• When aerobar space is tight, place your computer on top • Tuck straw on either side for best aerodynamics • Fits on TORPEDO SYSTEM 100, TORPEDO SYSTEM 400 & REFILL UPGRADE KIT BOTTLES (each sold separately) • Compatible with most computers, including large screens (sold separately) • Glass-reinforced nylon • Weight: 18.5 grams
XLAB Torpedo Versa 200
$87.95
Aerodynamic dual-bottle BTA hydration system that features a dynamic, multi-position computer mount to accommodate your changing needs. Raise the computer mount up to tuck in a refill bottle for race day, or lower it down for a standard bottle while maintaining the optimal view for training days. - Telescoping Garmin mount features on-the-go tilt adjust to avoid glare. - Zero-leak design with a sealed viewing window to easily monitor liquid levels, and a leak-free Dolphin Breather Valve that lets air in but doesn't let water out. - Capacity: 26oz (768 mL) - Material: Plate: 6061-T6 Aluminum - Cage: Nylon Composite Vee Cage - Computer Mount: Nylon Composite - Bottle: Lead free, BPA-Free and HDPE food safe certified bottle - Brackets: Nylon composite with Velcro straps coated with no-slip extension grip - Adjustment Width: 75-150mm - Weight: 9.3oz (265g)
XLAB Versa Computer Mount
$32.95
Telescoping Garmin Computer Mount for Versa Plates. Raise the computer up for Refill Bottles, or lower it down to clear Standard Bottles. On-the-go tilt adjust to avoid glare. - Telescoping computer mount makes for a seamless switch between Refill or Standard Bottle - Compatible with Garmin bike computers and Multisport Watches - Requires Versa Carbon Mount or Versa Aluminum Mount Telescoping Garmin-Specific Computer Mount - Raise the computer mount up to tuck in a Refill Bottle for race day, or seamlessly lower it down for a Standard Bottle to maintain the optimal view for training days. Compatible with Garmin bike computers and multisport watches. On-the-Go Computer Tilt Adjust - Avoid changing glare with a tilt mechanism for easy adjustments while you ride Arrives Fully Assembled - Few steps required to install and head out on your first ride - Weight: 1.9oz (54g) - Construction: Nylon Composite Includes - Fully assembled computer mount - 2 screw sets: one for Versa Carbon Plates, and one for Versa Aluminum Plates Warranty: Limited Lifetime
Topeak BarXtender
$24.95
Gain more room or find the perfect position for lights, computers, music players, GPS, or whatever, with the Topeak BarXtender. Attaches securely to the handlebars or stem and adjusts for optimum position. - Clamp: Fits 22-38 mm tubes (shims included) - Crossbar: Device mount bar 25.4 mm - Material: Engineering Grade Plastic and Steel - Mount: Handlebar, Handlebar Stem - Size (L x W x H): 18 x 3 x 3 cm, 7.1” x 1.2” x 1.2” (folded) - Size (L x W x H): 13 x 10 x 3 cm, 5.1” x 3.9” x 1.2” (open) - Weight: 116 g / 4.08 oz
Topeak UTF Multi-Mount
$44.95
Up-To-Front Multi-Mount aligns everything to be mounted front and center for viewing convenience and to easily capture those precious ride moments, track your ride, and illuminate your way home from your adventure. Includes adapters for mounting GoPro/Shimano Sport Cameras, Garmin Edge/Wahoo/Sigma GPS cycle computers, Topeak CubiCubi front lights, WhiteLite HP 500, WhiteLite 800BT, and other GoPro-mount-compatible devices. Flipflop mounts can be positioned to customize device viewing height so you can be focused and enjoy your ride! - Material: Forged aluminum / Engineering grade polymer - Modular Multi-Mount: Adapters included for GoPro / Shimano Sport Cameras, Garmin Edge / Wahoo / Sigma - Device: GPS cycle computers, Topeak CubiCubi front lights, WhiteLite 800 BT, and WhiteLite HP 500 - Bracket: Fits 25.4 – 31.8mm handlebars (shims included) - Max Load: 480g / 16.93oz - Added Features: Angle adjustment (Sport Camera), Rotates for landscape or portrait viewing (RideCase) - Weight: 52g / 1.83oz - Size: 12.5 x 6.6 x 4.3cm / 4.9" x 2.6" x 1.7"
Topeak UTF Multi-Mount for Integrated Handlebars
$39.95
An innovative cycle computer/action camera center mount, specifically designed for integrated stem/handlebar systems. Various mounting positions for Garmin Edge/Wahoo/Sigma GPS cycle computers and GoPro/Shimano sport cameras, Topeak CubiCubi front lights, WhiteLite HP 500, WhiteLite 800 BT, and other GoPro-mount-compatible devices. - Compatible Devices: Garmin Edge / Wahoo / Sigma GPS bike computer / GoPro action cams and other devices with GoPro mount - Handlebar Compatibility: Shimano Pro Stealth, FSA Plasma, Ritchey WCS Solostream, SCOTT SYNCROS RR1.0 Carbon Aero 420, Most Talon, Canyon H31 & CP series - Material: aluminum / fiberglass composite - Max load: 220g - Weight: 40g (120mm) / 45g (150mm) - Dimensions: 12 x 3.5 x 3cm (120mm) / 15 x 3.5 x 3cm (150mm)
Syncros Foil Stem Computer Mount
$24.99
Providing the perfect integrated position, the Syncros Computer hanger places your Garmin just in front of the stem when combined with the Syncros Foil Stem.
Syncros Fraser iC Computer Mount
$59.99
Made in conjunction with industry leaders K-Edge, our new computer mount range is machined from alloy to provide a strong secure integrated computer mount for your bike. This mount is designed to fit seamlessly with your Fraser iC cockpit with its negative stem angle. - Fits Fraser iC combo - Alloy construction angle adjust - Wahoo insert available separately
Syncros Garmin Insert Computer Mount
$9.99
Replacement Garmin insert for our computer mounts. - Replaceable Garmin mount - Check mount for compatibility
Syncros GoPro iM
$14.99
Mount your GoPro directly to the underside of the saddle on 2019 Syncros saddles equipped with two threaded inserts. - Designed for Syncros saddles featuring integrated Mount iM from 2019 onwards. - Screwed mount, safer and more integrated - Rotating axle enabling adjustable camera shooting angle - Delivered with mounting screws
Syncros Hixon iC, Stem XR + FL Computer Mount
$59.99
Made in conjunction with industry leaders K-Edge, our new computer mount range is machined from alloy to provide a strong secure integrated computer mount for your bike. This mount is designed to fit with the Hixon iC cockpit for perfect integration on your trail or Enduro setup. - Fits Hixon iC combo, XR & FL stems - Alloy construction angle adjust - Wahoo insert available separately
Syncros Stem RR iC Computer Mount
$69.99
Made in conjunction with industry leaders K-Edge, our new computer mount range is machined from alloy to provide a strong secure integrated computer mount for your bike. This mount works in conjunction with our new RR iC stem as found on the new Scott Addict. - Designed for Syncros RR iC stem - Mounts into face plate - Integrated design - Fits all Garmin models - Wahoo inserts available
Syncros Top Cap Computer Mount MTB XC
$49.99
Computer stem cap mount for negative XC cockpits providing a clean and uncluttered look. - Designed for Syncros Fraser iC SL XC cockpits - Replaces the top cap - Integrated design - Fits all Garmin models - Wahoo inserts available
Syncros Wahoo Insert Computer Mount
$9.99
Replacement Wahoo insert for our computer mounts. - Replaceable Wahoo mount - Check mount for compatibility
Syncros iS Accessory mount
$12.99
The Accessory mount was developed as a flexible solution for mounting tubes to your frame. The various mounting solutions allow for bottle cage mounting, frame mounting and it will also work with our Direct mount saddle system. Simply select your mounting and adapt the mount (using the suggested cut points where relevant) to fit. - Glass Fiber reinforced Nylon mounting bracket - textile strap - Frame bracket offering the possibility to mount accessory like an inner tube, tool, jacket, etc from your bike frame thanks to Velcro strap attachment - The bracket can be screwed on frame rivets or shortened then mounted with zip-ties on frame tubes - Also compatible with Syncros Direct Mount Saddles through their threaded inserts - Weight: 23g approx.
Sigma Sport Butler - Out Front Mount
$19.99
Enjoy easy viewing with the Butler Out Front handlebar mount! Out Front Mount for following models: BC 1909 STS BC 2209 STS ROX 5.0 ROX 6.0 ROX 8 ROX 8.1 ROX 9 ROX 9.1 *Note: not for use with ROX 10.0
SRAM QuickView Adaptor
$5.00
The QuickView was designed to put the Garmin Edge Computer out in front of the stem. Fits Garmin 605 and 705. - Glass-filled nylon, stainless steel Torx T25 bolt - Weight: 20g
SRAM RED eTap Blips
$110.00
Be it the fireworks of a finale, an ideal rhythm, climbing on the top, or a deep, dark place extracting the last kilojoule of effort on your bike split, you want to adjust your gear with the twitch of a finger. eTap Blip satellite shifters allow you to shift when you want, where you want. - Limitless remote shifting positions for drop and aero bars - Wired shift buttons can be positioned however the rider prefers - Connect to Blip Box or drop bar eTap levers - Compatible with SRAM RED eTap shift/brake controls
SRAM eTap BlipClamp
$16.00
- Use to keep Blips in place on handlebars - Fits 31.8mm round portion of drop bar - Clamp mounts directly to bar outside of tape zone - Ideal for use with thumbs or index fingers while hands are on the tops - Right and left specific, just like Blips - Weight: 12 grams (for pair) - Material: Polypropylene - Compatibility: 11-speed - Recommended Group: SRAM RED eTap
SRAM eTap BlipGrip
$21.00
External Blip mount for aero extensions and base bars - 360 degree rotation for adjustment - Aero use only to fit 22.2mm OD bar 65mm in length - Fits all Zipp aero extensions and base bars - Blips not included - Weight: 57 grams for pair (does not include Blip) - Material: Polypropylene + TPE - Compatibility: 11-speed - Recommended Group: SRAM RED eTap
Ritchey Universal Stem Face Plate Accessory Mount: GoPro
$19.95
Free up bar space and secure your GoPro and many other stem-mounted accessories with our Ritchey Universal Stem Mount. Our unique mount means clutter- and hassle-free mounting of your favorite devices where they're easily viewed and operated. - Compatible with Ritchey C220 and 4-Axis 44 stem faceplates - Forged and machined alloy - Includes extended-length hardware
Redshift Sports Computer Mount For Shockstop Stem
$39.99
Mount your bike computer directly to your ShockStop Suspension Stem. The ShockStop Computer Mount puts your Garmin, Wahoo, Cateye, Joule, Mio, Magellan, or Polar bike computer in perfect position. Two different mounting positions let you fine-tune the fit of your computer and tuck it out of the wind. Benefits: - Conveniently places your computer directly in front of your stem within easy reach - Two different mounting options let you fine-tune the position of your computer Details: - Fits ShockStop Suspension Stem only (Note: using the computer mount with the +30 degree stem will place the computer in a very upright position in line with the stem) - 2 different mounting positions (upper & lower) Compatibility: - Compatible with Garmin Forerunner QR kits - Compatible with Garmin Edge 1000 in portrait and landscape mode (upper position) and landscape mode only for lower position - Compatible with Wahoo Element and Polar in the upper position only
Page 1 of 5 Next page